LAMTEC

Measuring and control devices for optimal and economical energy use

Professional combustion controllers and complete combustion solutions

The combustion control and regulation units can be integrated into a SCADA monitoring system via several standard protocols.

Systems enhanced with LAMTEC controllers optimize the efficiency of combustion equipment worldwide. You can save fuel and costs, while also reducing the emission of harmful combustion products.

Want to know how? Calculate how much you could save online with our free utility.

LAMTEC savings Product overview

Combustion Management

Combustion Optimisation

Flame Monitoring System

Ignition System

Sensors

Measuring Systems

Etamatic Combustion control system

The ETAMATIC combustion controller. Dual microprocessor safety system, software-based configuration, network communication for SCADA systems. Optimized controller, software-based configuration of servomotors (compound), max. 4 for different fuel types. Maximum energy savings with fine-tuning.

Schematic diagram built with ETAMATIC controller

The schematic diagram built with the ETAMATIC controller, with flue gas analysis and a supply fan implemented with a frequency converter drive.

ETAMATIC-OEM version. A fast, cost-effective and professional solution for combustion equipment manufacturers and boiler renovation companies.

FA1 firing controller

The FA1 combustion controller has the same appearance as the ETAMATIC-OEM, but has only 1 servomotor control output. The FA1 controller is typically used for channel burners with multiple parallel burner heads (up to more than 10).

Devices that can be connected to ETAMATIC

Devices that can be connected to the ETAMATIC. Gas line tightness test, flame detector function, built-in power controller, external temperature feedback. Start-up and operating hour counter, adjustment with software and manual programming unit are available.

FMS combustion controller for mixed-fuel combustion solutions

The FMS combustion controller for mixed-fuel combustion solutions. Control of biogas/natural gas/oil combustion in parallel. It has 5 output control channels. Cross-principle combustion power control without power loss is possible between any two fuel channels.

The FMS control combustion control system

The combustion control system implemented with the FMS controller: FMS controller, F250 safety flame module, NEMS16 first error display/error analyzer. Rack design.

Schematic diagram built with FMS firing controller

Schematic diagram built with the FMS combustion controller, flue gas analysis, and supply fan controlled by a frequency converter drive.

VMS firing controller

The VMS combustion controller. Contains 5 output control channels, but does not include sequencing logic (no gas path tightness test/flame function). Electronic compound controller. Can be used as a professional combustion controller for PLC controlled combustion control systems.

Firing scheme implemented with VMS controller

Firing scheme implemented with VMS controller, with regulation implemented with flue gas analysis.

Safety (self-monitoring) flame devices

F200K flame detector (also in Ex version), can also be used for systems from other manufacturers. F250 flame signal amplifier module, FFS05, FFS06 (in Ex version) UV-infrared flame detectors.

LT1 Microprocessor-based O2 analyzer

The LT1 is a microprocessor-based O2 analyzer with 2 probes. Standard communication and analog signal outputs, compatible with systems from other manufacturers.

Lambda probe LS1 and Combi probe KS1

Lambda probe LS1 and Combi probe KS1. Calibration gas can be adjusted, calibration is automatic.

LT2 Lambda transmitter instrument

A cheaper solution for measuring O2 or CO/H. Since the LT2 has several standard signal outputs and a built-in controller, it can also be integrated into an existing combustion system as an O2 control system. Its use optimizes the flue gas content, which reduces fuel consumption and results in direct cost savings. Calculate how much you could save by using Oxygen Correction on the website below! LAMTEC Online energy calculator: http://www.lamtec.de/v2/Energieeinsparung/Einsparung_hu.php

LS2 Lambda probe, for LT2 analyzer

O2 and CO measurement

Combustion air flow meter

Configuration software: for VMS-FMS-FA1-ETAMATIC combustion controllers

Processor module for integrating combustion controllers into the SCADA system

The type of bus system and communication protocol to be used is determined by the plug-in adapter module shown on the right. Profibus DP, Interbus, Modbus, Modbus TCP (Ethernet).

D/A module, addressable on the Lamtec System BUS

The LAMTEC SYSTEM BUS is actually a CAN bus with a special protocol.

Internet connection and SCADA monitoring system diagram Internet connection and SCADA monitoring system diagram

Internet connection and SCADA monitoring system scheme, similar with FMS or VMS controller instead of ETAMATIC.

Company:	Contact person:	Contact:	E-mail	Main systems	Website
GB-Ganz Kft.	Technical Director	Phone: 1-260-2727	gbganz[at] gb-ganz[dot] hu	GB Ganz products	http://www.gb-ganz.hu/
Termoko Kft.	Koósz József	Mobil: +36 30 684 1711	termoko [at] chello [dot] hu	Benninghoven, Oertli	http://www.hõhullám.hu/tuzelestechnika.htm
Phönix-Adler Kft.	Gubicza Imre	Mobil: +36 20 457 2134	gubiczai [at] pannonmail [dot] hu	Saacke, Elco-Kloekner, Baltur, Oertli
					Would you like to become a LAMTEC system integrator? Contact us!

Our system integrators are combustion technology specialists with specialized experience in high-performance systems.

Manufacturer's website, further detailed technical information

We provide the units necessary for the complete technical implementation from the manufacturer's product range.

http://www.lamtec.de

Equipment manufacturers using Lamtec combustion technology products:

Hungary: GB-GANZ Tüzeléstechnikai Kft.

LAMTEC

Professional combustion controllers and complete combustion solutions

Hívjon, jövünk!